Instructions For Use

Place ladder against the gutter leaving clearance between rungs to position the Lock Jaw Ladder Grip.

Raise the adjustment knob to ensure the bar assembly is near the fully raised position. The bar can be located down against the ladder rail once the device has been clamped to the Gutter

Before climbing the ladder, use two hands to open handle. Push safety lock forward with thumb while pulling trigger to release handle. Then clip the device to your belt before climbing ladder.

With handle in the open position locate the device’s jaws over the gutter with the bar located over the ladder rail. Device should be located firmly against ladder rail.

Ensure that the adjustable jaw or curved jaw fits snuggly under gutter lip. This minimises twisting of the device when in use.

Push the handle down with the palm of your hand to lock the device. There is no need to depress the handle trigger assembly when closing the handle. A distinct “clicking” sound should be heard as the handle locates into the body of the product. With the handle in the closed position pull lightly against the handle (without depressing the trigger) to ensure that the handle is locked in the closed position.

Using the adjustment knob locate the bar assembly down firmly onto the ladder rail then spread spring loaded locking tabs to slide bar firmly against the side of the ladder rail. Do not use product if bar assembly cannot be firmly wound down onto the ladder rail and also secured firmly against the side of the ladder rail.